|
Clutch Components
| Clutch
Disc/Pressure Plate | Hydraulic equipment | Clutch
Cylinder Rebuild Kits | Clutch Mechanical Parts |
ORDER
YOUR PARTS, CLICK HERE
All ORDERS ARE PROCESSED ON A SECURE SERVER
Clutch components are
subjected to extreme service demands. Cheap parts suffer early
failure. We supply genuine BORG and BECK clutch parts. All clutch equipment carries a two-year limited warranty.
Clutch Disc and Pressure
Plate
Back to Top
| Clutch Alignment Arbor |
|
| Series I, II, III, all
models |
CDAA1 |
| |
|
| Driven Plate |
|
| 9" Series I, II, IIa,
through 1966 |
591704 |
| 9.5" Series IIa, III |
FRC2297 |
| |
|
| Pilot Bushing, bronze,
in flywheel, for gearbox first motion shaft |
8566 |
| |
|
| Pressure Plate
|
|
| 9" Series I, II, IIa,
through 1966 |
591705 |
| 9.5" Series IIa, 1967-1971 |
571228 |
| 9.5" Series III |
576557 |
Clutch Hydraulic Equipment
Back to Top
| Master Cylinder
|
|
| Series II, IIa, through
1968, with separate steel reservoir |
90569126 |
| Late Series IIa, III, 1969
on, with integral reservoir |
550732 |
| |
|
| Adaptor between clutch
master cylinder #550732 and outlet pipe |
|
| Late Series IIa, III |
139082 |
| |
|
| Slave Cylinder, at bellhousing |
|
| Series II, IIa |
266694 |
| Series III |
FRC8531 |
| |
|
| Flexible Rubber Hose,
to slave cylinder |
|
| Series II, IIa |
268341 |
| Series III |
NRC2129 |
Note: STAINLESS STEEL BLEED SCREW is supplied
exclusively by The British Northwest Land Rover
Company
for the clutch slave cylinder and all wheel cylinders. |
Girling Grease
Essential for proper rebuilding and periodic servicing of
GIRLING
hydraulic cylinders. Minimizes corrosion and early
cylinder failure |
GLR1230
|
| |
|
| Girling
Hydraulic Fluid |
|
| 12 ounce
bottle |
GTLMAP |
| 32 ounce
bottle |
GTLMAQ |
Mechanic's Caution: Use only GIRLING
approved
Castrol GT LMA brake fluid or silicone hydraulic fluid.
The hydraulic system will be destroyed by
any other brake fluid! |
| PIPE, Master cylinder to flexible
hose. |
|
| Series II, IIa |
569224 |
| Series III |
NRC4222 |
| |
|
| PIPE, from
flexible hose to slave cylinder |
|
| Series III only |
NRC1655 |
| |
|
| PIPE, from
reservoir to clutch master cylinder |
|
| Series II, IIa, through
1968. |
562978 |
| |
|
| Reservior |
|
Series II, IIa, through
1968. Steel. Shared with brake master cylinder
Reconditioned |
504105R |
Clutch Cylinder Rebuild
Kits
Back to Top
| Rebuild Kit,
Clutch Master Cylinder |
|
| Series II, IIa, III |
8G8837 |
| |
|
| Rebuild Kit,
Clutch Slave Cylinder |
|
| Series II, IIa, III |
8G8600 |
Clutch Mechanical Parts
Back to Top
| Bushing,
Shouldered, Bronze, for throwout bearing. |
|
| Series II, IIa |
231075 |
| |
|
| Bushing, Spherical
for clutch release shaft |
|
| Series II, IIa |
217984 |
| |
|
| Felt Seal for spherical
bushing |
|
| Series II, IIa, 2 required |
217985 |
| |
|
| Clevis for
vertical rod, with pin and spring |
|
| Series II, IIa |
275199 |
| |
|
| Clevis Pin for
clutch release shaft, specially hardened |
|
| Series II, IIa, 2 required |
536803 |
Mechanic's Note: Even the best quality
clevis pins are
known to break. We recommend only original equptment
parts
and that both pinsbe renewed whenever servicing this
critical area. |
| Clutch Withdrawal Sleeve contacts
the pressure plate |
|
| Series I, II, IIa |
231074 |
| Cross Shaft Series II, IIa,
in bellhousing |
231943 |
| Bush for cross shaft,
shouldered |
214794 |
| Bush for cross shaft,
plain |
214793 |
| Oil Seal for clutch
release shaft. Series I, II, IIa |
90214787 |
| |
|
| Oval Blanking
Grommet, rubber, for early bellhousing |
|
| Series I, II |
232604 |
| |
|
| Push Rod for
clutch slave cylinder. Order clevis separately, (above) |
|
| Series I, II |
537601 |
| Series IIa |
576751 |
| |
|
| Rubber Boot for
cross shaft, at bellhousing |
|
| Series I, II |
236281 |
| Series IIa |
553262 |
| |
|
| Spring, returning
clutch release shaft, at slave cylinder |
|
| Series I, II, IIa |
278690 |
Back To Parts Catalog Index
HOME
|
