The British Northwest Land-Rover

 

Company

Vehicle sales , service , restoration and parts sales.

360-866-2254

 

 

                                      

 Work Products
| Body Work Products |

ORDER YOUR PARTS, CLICK HERE
All ORDERS ARE PROCESSED ON A SECURE SERVER

Part

Part #

Cover Pad for gearbox tunnel 396721
Exhaust Header Kit, Minimizes exhaust gas back pressure. Improves engine breathing. 
We recommend large diameter exit pipes for maximum performance and economy. 
See information below regarding our complete header exhaust system for 88" or 109
CEH88/109
*Pipe and Muffler Set for exhaust header. Flanged exhaust system bolts to header. 
Do-it-yourself bolt on kit requires no welding and allows correct, unrestricted free-flow 
breathing, completing the header concept as it was intended. Comes complete with hangers
 
For short wheelbase models PMK88
For long wheelbase models PMK109
   
Floor Mats  
Standard original equiptment floor mats for the front floors of all Land Rover models. 
State 4 or 6 cylinder
 
Right 331392
Left 331393
*Heavy Duty floor mats of our own manufacture are more than twice the weight of the original equiptment mats, and made from industrial quality material. SHould last the life of the vehicle  
Right B331392
Left B331393
Clip Securing Floor Mat 355847
   
Floor Mats, Nu-Link, Extremely rugged rubber mats are virtually indestructible. 
Allow floor to breathe. Minimize rust. Specially fitted for left-hand drive models.
 
Front, Pair, 4 cylinder GLR332
Rear, 88 GLR333
Rear, 109", State model GLR334
   
*Insulation Kits, Self-adhesive backing makes application easy. 
Pieces accurately cut to fit. Premium material. Fire and mildew resistant. 
Used in the highest quality European cars. Dampens sound, vibration and temperature.
 
Underbonnet Kit, for engine compartment. All models UIK88/109
Superkit, 88" for entire vehicle including underbonnet SIK88
Superkit, 109" for entire vehicle including underbonnet SIK109
   
Lamp Guards  
Series II and IIa, covering two small lamps, front and rear          Pair 320626
Series IIa and III, covering three front lamps on wing                 Pair 345985
   
Lifting and Towing Rings  
Front          Pair 242139
   
Mud Flaps, Heavy black English rubber.
Control mud and wheel spray on rear windows. Land Rover emblem on rears.
 
Front          Pair  320601
Rear           Pair  320590
   
*Roof Rack, Standard as shown in factory sales literature. Light weight welded steel tubing. New and Reconditioned 320532
   
*Roof Rack, Safari, Heavy galvanized square tubing. Full roof length and width.
 Expedition quality. Disassemble in minutes for shipping and storage. Built in-house
 by our aerospace-certified welder to the most rigorous specification. We also 
make a rack which fits both 88" and 109"
 
Various sizes available SRR88/109
   
Seat Belts, genuine BRITAX as fitted to Series III Land Rovers. State Model.  
Lap Belt Assembly GLR373
Shoulder Harness Assembly (state right or left MRC7655
   
Shoulder Belt Anchorage for above. Genuine Land Rover, allows attachment of 
shoulder harness at roof for greater safety. State 88" or 109"
 
Right 348473
Left 348474
   
Inertia Harness, Top quality, original equiptment Land Rover safety belts
allow full freedom of movement, greater comfort.
 
Attach at roof line                                                                                                               Pair MRC4370
   
Winches, We carry a good selection of high-quality new, second-hand, and rebuilt
 winches of all types: electric, hydraulic,power take-off, cable, and capstan. Please 
call for assistance and price quotation.
 
*Expedition Hand Winch, A very sturdy hand winch with a stated capacity of 
4,000 pounds. All critical components are made from high tensile strength malleable
 iron. With built-in tackle block for heavy lifting or pulling. Works in any position. 
Laboratory tests at Ohio State University's engineering department proven this unit
 (with a 36" lever) could lift 14,100 pounds! Tested by British Northwest for over 20 years.
 
By far the best we've ever seen or used 210015
   
Handyman Jack. The original jack by the original maker since 1905. This is still 
the jack of choice as imitations are of very poor quality. All high tensile strength 
malleably ferritic iron castings. Available in 42", 48", and 60" heights. Works also
 as winch, clamp, spreader, and hoist. Will right a rollover, pull an engine or gearbox, 
and jack out damaged body panels. Works in any altitude, vertical, horizontal, or 
otherwise, under water, after dark and on Sundays. Guaranteed a full 24 months.
 
42" Handyman Jack HMHJ42
48" Handyman Jack HMHJ48
60" Handyman Jack HMHJ60
   

Note: We also stock new and used capstan winch rope.


 
Spare Tyre Cover, for bonnet, interior, or rear door mounting, with Land Rover logo MRC7365
Spare Tyre Mounting Kit, for bonnet GLR339
Steering Wheel Cover, High quality black leather SCL30/01
*Waterproof Ignition Kit: Special boots for the distributor, coil, and all high tension wires.
Properly sealed with silicone grease, this kit renders the ignition virtually waterproof
IWK4
*Windshield Washer Kit, genuine TRICO. These unique ex-Ministry of 
Defense kits are designed speciffaclly for the Land Rover, and contain all 
parts required to fit washers where none is fitted, or to replace existing washer.
  Complete with instructions and all mounting hardware. 
Visually correct for all Models
526358
   

Body Work Products

 
  Part#
*Aluminum Primer, Self-etching aircraft quality primer specially formulated for bonding to aluminum. Must be used whenever repainting alloy panels. Unbeatable for steel as well.  
12 oz. spray 215SP
Quart QAP1
Gallon GAP4
   
Body Paint, Original factory colors: Bronze Green, Pastel Green, Mid-gray, Sand, Marine Blue, Limestone, and Poppy Red. State enamel, lacquer or polyeurethane enamel. ADD 20% for Poppy Red.  
12 oz. spray 244276
Quart 262069
Gallon 262072
   

Back to Parts Catalog Index

HOME